I think it's worth highlighting this in its own thread, especially for potential newbies who might think boating is always a piece o' cake: ...
|
|
|
Took possession of this boat a few weeks back, The shaft seal was leaking during the sea trial, yard fixed it, but did not test it as it was calculate...
|
|
|
Don passed away last night at his home surrounded by family. He will sorely be missed.
|
|
|
It's been 3-weeks since we left Ensenada with the Baja Ha Ha fleet and we are now anchored in La Paz, something close to 900 nms away from Ensenada......
|
|
|
I was going to mount the tp-link eap610 outdoor ap on a pole on top of the flybridge. Then noticed the manual requires connecting a grounding wire...
|
|
|
Hello everyone. I've got a 3208 on a 43 Searay I've just bought I'm having problems with the starboard motor from what I've been told the guy I...
|
|
|
I know most of us don't have outboards but thought I would share. In Miami, there has been a rash of lower unit thefts totaling about 8 so far in two....
|
|
|
Garmin devotes most of their sonar marketing to fishermen but we have put together a Garmin system on our Krogen 42 and are evaluating it for...
|
|
|
I just looked at a very nice Pilot 30 but the stuffing box concerns me. How in the world do you service the thing or get to it in an emergency? Not...
|
|
|
I read an article on marine howto that was recommended earlier here by other boaters. I may have got some points, but not all. I have tried to make a....
|
|
|
Where is the best place to buy a galvanized anchor chain in SEQ? I have a 25kg Rocna anchor and only 8mm chain and want to upgrade to 10mm. Will...
|
|
|
I want to install a wind generator on my GB42 Classic. Does anyone have experience or an opinion on location? One thought was the mast. But I can't....
|
|
|
I have a Northern Lights 5k generator. When switching from shore power to generator there is a noticeable change in voltage that I can hear in my ac....
|
|
|
Since cannot find off-the-shelf replacement exhaust mixing elbows for my Ammarine 6404 diesels am going to have custom ones made. Are there any...
|
|
|
Hi all. I've just joined the site. I'm from England and in need of a bit of advice. I have a Yanmar 3gm engine and gearbox fitted to it is this...
|
|
|
|
