Today was a good day on the water catching Dorado. We caught our limit of nice fish, and have had good winds and seas. Today we are in between...
|
|
|
Anyone have or have had this type of seal assembly? Mine is leaking from the forward front collar right where the shaft goes in. I'm in the water and....
|
|
|
Hello all. So this question is about a spare prop! I'm big on having spares and also upgrading where possible. I would like to have a spare prop on...
|
|
|
Hi, My current dinghy launch setup works okay but has one weak point that I worry about both from a safety and usability perspective, especially as I....
|
|
|
First, I know I am opening a can of worms here and going down this rabbit hole, but I want to ask this question on Ferro-Cement boat building. Has...
|
|
|
The sundeck roof is accessible from the bridge. but the bridge's hard top is a bit out of reach. I wonder what to do when I see 4 inch snow on the...
|
|
|
Nearing retirement and planning for a cruiser to use in the Bahamas and parts of the Loop. I like the American Tug 34, but also find many of the...
|
|
|
Please I need advice on the type or kind of boat I can get at a cheaper rate. I don't have much but I also need it based on where I am. The one...
|
|
|
Does anyone use any thread lock to hold the anode onto the cap? I am replacing the anodes on my aftercoolers and heat exchangers and 2 of the anodes....
|
|
|
I'm considering a GB 32 Sedan for weekending in Long Island Sound. Anyone have any positive or negative feedback? Is insurance hard to get for a...
|
|
|
|
