We are planning first ICW cruise in the Spring- Florida area and hopefully Bahamas. Question- When we anchor, moor or dock the boat and go ashore to....
|
|
|
I often use the following link to check fuel consumption. It lists numerous engine types and their fuel burn at RPM's from idle up to WOT. I've...
|
|
|
We're out in the San Juan Islands (it's beautiful - but cloudy..) For the 3rd time in a row, I get a strong electrical when I run my Onan 15k...
|
|
|
So my wife and have have been in Port Orchard for a couple days at the marina. Nice spot. Today as I was sitting in the boat reading, I hear a...
|
|
|
Just found this story on YouTube. Boat fire. Would not want to be in their shoes....
|
|
|
Can someone help me out by identifying this item ? The picture is from a Prairie Boat Works 36 for sale in California on Yachtworld. Thanks in...
|
|
|
I have to admit, after some research, I came across this material a few years back when re-doing the rudder table on my boat. The rudder table sits.....
|
|
|
I have three new series 32 - 1000 CCA house batteries. Over this past winter the boat was professionally rewired, All of the electrical switches,...
|
|
|
If this question has already been addressed my bad for not finding the thread. My question is this: Am looking at a boat withe DD 671 TI 485HP...
|
|
|
I have a PT42 with twin Lehman's sp225. One of them has a large hole in the crank case now after a 3 hour tour. Should I replace with another sp225...
|
|
|
Our Grunert Cold Plate refrigeration system needs to be replaced. It consists of 2 refrigerator cold plates and one freezer cold plate, plus a new...
|
|
|
|
