Does anyone know of any marinas or municipal docks/harbors with no or minimal waitlist? Around a 49' loa Anywhere from PNW to south central Alaska....
|
|
|
Hi All, Full disclosure, this is not my idea, I learned from a TF member about ten years ago, but I thought I would pass it on as some may not...
|
|
|
Sun Communities Inc., a publicly traded REIT that owns or operates 426 manufactured home and RV communities purchased Safe Harbor Marinas. They are...
|
|
|
Assuming all other things equal lets pretend you have an old 53 hatteras cruising at hull speed. Is the efficiency (nmpg) materially different if the....
|
|
|
Just took possession of my new-to-me 1985 Albin 43 with twin Ford-Lehman 135s and wanted to change fluids/filters/etc. As I look at the existing...
|
|
|
This should be a short topic. I have about 3 half filled containers of different brands of oil. All are for the diesel main engine. They all have...
|
|
|
So one project this fall was to have all the fuel hoses from the fuel tanks replace. I believe these are the original lines from 1988.
|
|
|
Boat project #3,271... My ideal windlass, probably original to the boat, is mounted on a 3.5" thick, 12"x16" hunk of solid wood of unknown...
|
|
|
We have a large 100+ gallon holding tank and it has an aeration pump that I believe is there to promote good bacteria growth and eliminate smells...
|
|
|
Just bought a 1975 GB32. One of the first of the Fibreglass ones. It needs a new anchor. Rocna sizing has it at 15kg but I'm considering downsizing...
|
|
|
We have a bayliner 3888 with 2 manual flush heads. We had a fart blocker on the vent line from the holding tank. Thought that was possibly clogged up....
|
|
|
Has anyone ever built their own Teak swim step? Where does one source that much teak? Our local "exotic woods" lumber yard has one piece. And...
|
|
|
|
