Hi All - I've been on the Magic Carpet since September, moved from Port Ludlow to John Wayne Marina (Sequim) with a permitted live aboard. As lovely.....
|
|
|
My MT36 has the Ford Lehman 135 with a WOT of 2500 rpm. I can only get 2300 rpm. Boat has a clean bottom and a four blade prop. At 2000 rpm I'm at 7.....
|
|
|
OK, I'm going to feel dumb if almost everyone knows this, but I recently worked with a radar setting that let me get through 500-700 crab pots with...
|
|
|
Hi all, As you perhaps know I am already looking quiet some time for a stabilizer system which I could have built in my ST 52. I have considered the.....
|
|
|
Read these posts in the "Victoria BC to Portland, Or" thread and thought it might make for an interesting discussion because of the varied landscapes....
|
|
|
To the mods: I know there is a dedicated forum for electronics, but I am getting zero response there.... seems all the cool kids are on this forum,...
|
|
|
Just got off a chat with Garmin support. I have a 7612 whose touchscreen has failed after only 3 years of pampering indoors in the pilothouse. ...
|
|
|
Doing my first DIY stuffing box replacement at next haul out. I understand that the toughest part is the removal of the shaft coupling which I bought....
|
|
|
Has it or do you anticipate it soon impacting your travel plans? We have a couple that was about to fly to Italy regarding a boat build for us and we....
|
|
|
I am replacing my old A/C with 3 MarinAir units, 6K, 11K and 16K BTU's. Water flow from specs totals 825 gph (150, 275, 400 gph). Going to replace.....
|
|
|
PROLOGUE Introduction: A really bad but exciting idea. Cheryll and I have owned our 1970 Willard 36 (Hull #40) since we purchased her in San...
|
|
|
Some say this is a huge problem coming down the tracks. This is Federal mandate. Here is New Jerseys notice that they did not send out to residents......
|
|
|
|
