The Puget Sound Grand Banks Owners Association (PSGBOA) is holding their annual Rendezvous at Roche Harbor from May 8th-12th. Any boats in the GB fami...
|
|
|
Hi all; I have a mint condition 2003 Nordic Tug that I have loved - taken the inside passage to Alaska twice. But the stage of life has come to let he...
|
|
|
The supply line from the dosing pump to my diesel heater (Espar) is about 10 feet long and is a tiny nylon tube (2mm ID, 3.5mm OD). This tube is press...
|
|
|
I have an older Lowrance Chartplotter (HDS-7) which doesn't work with the current devices available from SiriusXM. Looking for someone who might have ...
|
|
|
I was looking for some guidance in setting up an auto-fill for my house bank. I searched this forum but didn't see anything. Any help is appreciated.
|
|
|
Has anyone had any issues with Mainship 400s, or others, that have Isolation Transformers affecting the GFCIs? With mine (2004 Mainship 400 original) ...
|
|
|
New to me, started up today, no issues fired right up, go out back to check raw water and see this (approx 1300rpm). Anything to be concerned? After a...
|
|
|
Looking to change my house bank to 800amp lithium, but keep my starters as agm. I have attached a proposed flow diagram, my main concern is the altern...
|
|
|
A change of course puts our GB 36 #599 up for sale. We purchased her from an estate whose owner had passed. She is currently berthed in Crisfield MD. ...
|
|
|
Hi! I've got a 1977 Californian with a few leaky salon windows. I'm tackling the worst of them. So far, I have removed the exterior frame, pulled the ...
|
|
|
Hey all first post, been doing some learning. Have a chance to buy a 43ft GulfStar MKII that has sadly had both of its perkins 120hp engines destroyed...
|
|
|
I have a 1978 Albin 33 with Ford Lehman 120. It is a dual station boat. I bought it last fall from a looper who had just closed the loop in MI. I'm wa...
|
|
|
Our Mainship is on the hard for paint and while there I had made a point to get a somewhat more accurate measurement of our Airmar BV744 depth/Speed t...
|
|
|
So I'm finally finishing the electrical and ready to start exterior projects. See the pic. The underside of the bridge is seriously separated. I want ...
|
|
|
Just a heads up for those that might be planning a trip up the Rideau from Kingston, if you have a fly bridge you will not be able to pass through the...
|
|
|
Hi All Can someone please help me with an issue on inverter charger. If I press any button on the remote panel I get blinking charge light for about 1...
|
|
|
Hi All - I've been unable to locate any similar archived posts and I already spoke with and sent pics to TAD to find a replacement part. TAD said it w...
|
|
|
These davits were custom made for the PO for a GB 42C. They are robust, very well made and supported and will comfortably hold over 1000 lbs. I person...
|
|
|
Hi there, Does anyone know if the stop solenoid is wired to positive directly, and then the negative run goes through the stop button (thus, when the ...
|
|
|
|