I'd like to remove the buildup on hose threads, raw water wash down sprayer, and even on some fixtures on the engine. Is warm vinegar water with or wi...
|
|
|
I'd like to remove the build-up on hose threads, raw water wash down sprayer, and even on some fixtures on the engine. Is warm vinegar water with or w...
|
|
|
My transmission cooler has some growth on it and I was going to make a flush kit and run Barnacle Buster through it. I got to looking at it and am won...
|
|
|
I have a Furuno TZT2 12 MFD with networked Furuno VHF, Radar, Satellite compass. I am pleased with the performance of this system AND Furuno's outstan...
|
|
|
I am trying to locate a supplier for these. They are an M6 thread and go to Osculati port windows. When I had my guys remove the windows for powder co...
|
|
|
Bought a Rocna anchor for our 35,000 lb Ocean Alexander 42’ sedan— we were in between sizes and I ordered up, to the 33kg ( 73lb). It is HUGE on our p...
|
|
|
Owner of 1971 Westerbeke diesel generator - engine only - 8.0BTD 1800rpm 12hp 3 cyl. 20 hours on rebuild, new starter, cleaned/rebuilt high pressure p...
|
|
|
Hi everybody. New owner of a 1977 GB 32 here. Longtime sailor and first time trawler owner. Looking forward to interacting with all of you. I'm sure I...
|
|
|
Appreciate some feedback on these oil samples, compared to maximum allowable, and in consideration of the engine hours. Not sure if these are souped u...
|
|
|
My Cat 3126 has developed an intermittent misfire that my mechanic in Florida thinks could be a leaking injector seal. He first suggested I replace th...
|
|
|
Hi, I am looking at a Defever 53 POC. Any feedback regarding max cruise speed (sweet spot), build quality, stabilizers, ride etc Thank you in advance,...
|
|
|
This is a new purchase and I am trying to source an owner's manual. Any suggestion greatly appreciated!
|
|
|
Hello, Currently in my search for a 31-35 foot trawler. Plan to cruise the Chesapeake for a few years then head out on the great loop. Looking forward...
|
|
|
Hello guys and girls, I'm trying to find the best way to drain both sea water and fresh water from the cooling systems to replace both coolers and the...
|
|
|
|
